РазThe work of version 2.6.0 is coming from May-June 2022. The new version, apparently, should be released soon. What will be new in WSJT-X 2.6.0?

New in version 2.6.0 RC (Release Candidate):

1) the settings of the transmission/reception period will be remembered for switching, for example, between the JT65C or FST4-120 modes.

2) The sound frequencies of TX and RX will be It and restore when you return from the regime that sets the default frequency of 1500 Hz (MSK144, FST4W, ECHO, WSPR, FREQCAL), and then switching back to FT4, FT8, Q65, JT65 or FST4.

3) in the journal of the competition, QSO can now be displayed in the prozing manner or -to -be manner; Sorting by time of radio communications. By default, the magazine scrolls to the last registered QSO, ready to insert a new contact record.

4) in the journal of the competition total QSO will be displayed in the window on the left below.

5) The location of the buttons of the modes is optimized by the dl 4k screens.

6) Updated the display of the combines of the keys.

7) The ok button now has focus by default in the Logqso dialog box. You can just press enter to record QSO.

8) Correction of the HAMLIB error: the program will make sure that VFO-B is selected for transmission in some models with two VFO, for example, IC7610, IC7100 and others.

9) improvement of decoding in FT8 mode: additional messages are marked as “A7”.

10) a new optional window "Active stations" will be added

11) Support for the International Digital Competition "Arrl Contest" .

12) Exact SNR measurements in Echo mode, including a large Doppler shift and a spread for EME.

13) clopes of selection of modes in the main window for FT4, FT8, JT65, MSK144 and Q65 will be added.

14) A button will be added to turn on or off the HOUND FT8 mode.

15) Additional backlit dx call and dx grid will be added.

16) An additional lighting messages containing RR73 or 73 will be added.

17) New records in all.txt: divide the file by year, by months, or even disagree with the record

18) Adding Russian to accessible translations of the user interface .

19) The Tune 90 guard timer will be added with the disconnection of "at will."

20) The Automatic response to messages, different from CQ, via UDP (JTALERT, etc.) will be allowed when Hold TX Freq is turned on.

21) suppression of the transmission of _ empty messages.

22) the possibility of suppressing self -determination of the program if the launch of several of its copies.

23) The processing of messages starting with " cq xxxx ..." will be fixed

24) (only Windows) Correction of the error, due to which the audio seams could be discarded.

25) Correction of an error due to which incorrect frequencies could be recorded in All.txt and incorrect data were sent to PSK Reporter
After changing the range.

26) Correction of the logic of automatic sequence during QSO in several specific circumstances.

27) Correction of error in WSPR mode when processing three -letter call sign.

28) Correction of an error that could lead to a stop of Omnirig 1.19 or later, if incorrect frequencies were used after initialization.

39) Clean some pop -up tips.

40) Eliminating the fall in the program if it is impossible to open the decoded.txt file.

41) elimination of an error causing the early ending of the WSPR transmission.

42) (only Windows): The last version of the Hamlib library for version 2.6.0 will be applied to the distribution.

Source:
[https://sourceforge.net/projects/wsjt/files/3(https://sourceforge.net/projects/wsjt/files/)